New chromium steel grade for creep applications

Egileak: L.M. Callejo, J.I. Barbero, M. Serna-Ruiz, D. Eguizabal, R. Fernandez-Martinez, P. Jimbert, B. Calleja-Saenz and A. López

Aldizkaria: Mater. Res. Express 9 106509 doi.org/10.1088/2053-1591/ac9573

3D printing to enable the reuse of marine plastic waste with reduced environmental impacts

Egileak: Canado, N; Lizundia, E; lekube, B, Arrillaga, A; Akizu, O; Minguez, R; Iturrondobeitia, M

Aldizkaria: Journal of Industrial Ecology 2022;1–16. doi.org/10.1111/jiec.13302

X-ray thermo-diffraction study of the aluminium based multicomponent alloy Al58Zn28Si8Mg6

Egileak: Y. Bilbao, J.J. Trujillo, I. Vicario, G. Arruebarrena, I.Hurtado, T. Guraya

Aldizkaria: Materials, 15, 5056 doi.org/10.3390/ma15145056

Comportamiento de diferentes calidades de aceros inoxidables en distintos entornos de un sistema de gestión de aguas

Egileak: L. Castrillejo, F. Ortega, J. Samper, T. Guraya

Aldizkaria: Material-ES, Vol 6(3), 16-20

The limit of hot isostatic pressing for healing cracks present in an additively manufactured nickel superalloy

Egileak: Vilanova M., Garciandia F., Sainz S., Jorge-Badiola D., Guraya T., San Sebastian M.

Aldizkaria: Journal of Materials Processing Tech. 300, 117398, 2022 doi.org/10.1016/j.jmatprotec.2021.117398

Microstructure and Phase Formation of Novel Al80Mg5Sn5Zn5X5 Light-Weight Complex Concentrated Aluminum Alloys

Egileak: JM Sanchez, A. Pascual, I. Vicario, J. Albizuri, T. Guraya, H. Galarraga

Aldizkaria: Metals, 2021, 11, 1944. https://doi.org/10.3390/met11121944

Different Phenomena Encountered during Dilatometry of Low-density Steels

Egileak: P. Jimbert , T. Guraya, I. Kaltzakorta, T. Gutierrez, R. Elvira, L. Tafaghodi Khajavi

Aldizkaria: Journal of Materials Engineering and Performance. 2022. doi.org/10.1007/s11665-021-06418-4

Influence of minor alloying element additions on the crack susceptibility of a nickel based superalloy manufactured by LPBF

Egileak: Vilanova M., Taboada M.C., Martinez-Amesti A., Niklas A., San Sebastian M., Guraya T.

Aldizkaria: Materials, 14, 5702; 2021, doi.org/10.3390/ma14195702

Novel creep steel developed through innovative composition and thermal treatment

Egileak: Callejo L.M., Barbero J.I., Serna-Ruiz M., Eguizabal D., Arregi B., Fernandez Martinez R., Jimbert P., Calleja-Saenz B., López A.

Aldizkaria: Materials at High Temperatures, (in press); 2021, doi: 10.1080/09603409.2021.1965765

Environmental Impact Analysis of Aprotic Li-O-2 Batteries Based on Life Cycle Assessment

Egileak: Iturrondobeitia, M., Akizu-Gardoki, O., Minguez, R., Lizundia, E.

Aldizkaria: ACS Sustainable Chemistry and Engineering 2021. 9(20), pp. 7139-7153 doi: 10.1021/acssuschemeng.1c01554

Quantitative electron tomography of polylactic acid/clay nanocomposites for better comprehension of processing–microstructure–elastic modulus

Egileak: Iturrondobeitia, M., Ibarretxe, J., Jimbert, P., Fernandez-Martínez, R.

Aldizkaria: Polymers and Polymer Composites 2021. 29(6), pp. 724-732; doi: 10.1177/0967391120932050

Effect of build direction dependent grain structure on fatigue crack growth of biomedical Co-29Cr-6Mo alloy processed by laser powder bed fusion

Egileak: Anuar, A., Guraya, T., Chen, Z.W., Ramezani, M., San Sebastian-Ormazabal, M.

Aldizkaria: Journal of the mechanical behavior of biomedical materials, 2021, 123, 104741, doi:10.1016/j.jmbbm.2021.104741

Manufacturing and forging issues encountered while upscaling 1.3C30Mn10Al-austenitic and 0.65C12Mn-duplex low-density steels

Egileak: Kaltzakorta, I., Gutierrez, T., Elvira, R., Jimbert, P., Guraya, T.

Aldizkaria: Materials and Manufacturing Processes 2021, doi:10.1080/10426914.2021.1944192

Fatigue Crack Growth Behavior of Al-4.5Mg-0.6Sc-0.3Zr Alloy Processed by Laser Powder Bed Fusion

Egileak: Chernyshova, P., Guraya, T., Singamneni, S., Zhu, T., Chen, ZW

Aldizkaria: Journal of Materials Engineering and Performance 2021, doi:10.1007/s11665-021-05989-6

Evolution of Microstructure during Isothermal Treatments of a Duplex-Austenitic 0.66C11.4Mn.9.9Al Low-Density Forging Steel and Effect on the Mechanical Properties

Egileak: Kaltzakorta, I., Gutierrez, T., Elvira, R., Jimbert, P., Guraya, T.

Aldizkaria: Metals 2021, 11(2), 214; doi:10.3390/met11020214

Optimizing Laser Powder Bed Fusion Parameters for IN-738LC by Response Surface Method

Egileak: M. Vilanova, R. Escribano-García, T. Guraya, M. San Sebastian

Aldizkaria: Materials 2020, 13, 4879; doi:10.3390/ma13214879

Grain Growth During Keyhole Mode Pulsed Laser Powder Bed Fusion of IN738LC

Egileak: Z. W. Chen, T. Guraya, S. Singamneni, M.A.L. Phan

Aldizkaria: JOM, 2020, 72(3), 1074-1084, doi:10.1007/s11837-020-04012-y

Microstructure formed during selective laser melting of IN738LC in keyhole mode

Egileak: Guraya, T.; Singamneni, S.; Chen, Z. W.

Aldizkaria: Journal of Alloys and Compounds, 2019, vol 792, pp. 151-160 https://doi.org/10.1016/j.jallcom.2019.03.419

Effect Of Biomaterials Hydrophobicity And Roughness On Biofilm Development

Egileak: I. De la Pinta; M. Cobos; J. Ibarretxe; E. Montoya; T. Guraya; G. Quindos

Aldizkaria: J. Mat. Sci. in Med., 2019, 30 (7), pp. 1 - 11. https://doi.org/10.1007/s10856-019-6281-3

Design, Microstructure and Mechanical Properties of Cast Medium Entropy Aluminium Alloys

Egileak: Sanchez, JM; Vicario, I; Albizuri, J; Guraya, T; Acuna, EM

Aldizkaria: Scientific Reports, 2019, vol 9. https://doi.org/10.1038/s41598-019-43329-w

Solidification During Selective Laser Melting of Co-29Cr-6Mo Alloy

Egileak: Chen, ZW; Guraya, T; Darvish, K; Phan, MAL; Pasang, T

Aldizkaria: JOM, vol 71 (2), 2019, pp. 7691-696. https://doi.org/10.1007/s11837-018-3264-7

Phase prediction, microstructure and high hardness of novel light-weight high entropy alloys

Egileak: Sanchez, JM; Vicario, I; Albizuri, J; Guraya, T; Garcia, JC

Aldizkaria: Journal of Materials Research and Technology, 2019, vol 8 (1), pp. 795-803. https://doi.org/10.1016/j.jmrt.2018.06.010

Compound Formation and Microstructure of As-Cast High Entropy Aluminums

Egileak: Sanchez, JM; Vicario, I; Albizuri, J; Guraya, T; Koval, NE; Garcia, JC

Aldizkaria: Metals, vol 8 (3), 2018, doi.org/10.3390/met8030167

Low Density Steels for Forging

Egileak: I. Kaltzakorta, T. Gutierrez, R. Elvira, T. Guraya, P. Jimbert

Aldizkaria: Materials Science Forum, vol 941, 2018, pp. 287-291 https://doi.org/10.4028/www.scientific.net/MSF.941.287

Influence of Cryogenic Treatment on Wear Resistance and Microstructure of AISI A8 Tool Steel

Egileak: P. Jimbert, M. Iturrondobeitia, J. Ibarretxe, R. Fernandez

Aldizkaria: Metals (2018), doi: /10.3390/met8121038

Use of support vector machines, neural networks and genetic algorithms to characterize rubber blends by means of the classification of the carbon black particles used as reinforcing agent

Egileak: Fernandez-Martinez, R.;Jimbert, P.; Ibarretxe, J.; Iturrondobeitia, M.

Aldizkaria: Soft Comput (2018). https://doi.org/10.1007/s00500-018-3262-2

Semi-automated quantification of the microstructure of PLA/clay nanocomposites to improve the prediction of the elastic modulus

Egileak: Iturrondobeitia, M.; Ibarretxe, J.; Okariz, A.; Jimbert, P.; Fernandez-Martinez, R.; Guraya, T.

Aldizkaria: Polymer Testing, vol 66, 2018, pp. 280-291

A parameter for the assessment of the segmentation of TEM tomography reconstructed volumes based on mutual information

Egileak: A. Okariz, T. Guraya, M. Iturrondobeitia, J. Ibarretxe

Aldizkaria: Micron, 2017, vol 103, pp. 64-77

Efecto de los tratamientos térmicos en la microestructura y propiedades de la aleación Alloy 625

Egileak: M. Angulo, A. López, R. Rodriguez, B. Calleja, T. Guraya

Aldizkaria: Material-ES 2017:1(4);75-78

Carbide distribution based on automatic image analysis for cryogenically treated tool steels

Egileak: P. Jimbert, M. Iturrondobeitia, J. Ibarretxe, R. Fernandez-Martinez

Aldizkaria: Materials and technology, 51(4), pp. 609–611, 2017

Suppression of ringing oscillations from high speed rubber compression curves through a detailed modal characterization of servo-hydraulic machines

Egileak: I. Uriarte Gallastegui, I. Garitaonandia Areitio, T. Guraya Diez, A. Arriaga

Aldizkaria: Polymer Testing, 60, pp. 365-373, 2017

Quantitative electron tomography of PLA/clay nanocomposites to understand the effect of the clays in the thermal stability

Egileak: M. Iturrondobeitia, T. Guraya, A. Okariz, V. Srot, P. van Aken, J. barretxe

Aldizkaria: J. Appl. Polym. Sci., 134, 44691. doi: 10.1002/app.44691

Toward the minimization of fluorescence loss in hybrid cross-linked core-shell PS/QD/PMMA nanoparticles: effect of the shell thicknes

Egileak: A. De San Luis Gonzalez, A.G. Bonnefond , M. Barrado Melendez, T. Guraya Diez, M. Iturrondobeitia, A. Okariz, M. Paulis Lumbreras, J.R. Leiza Recondo

Aldizkaria: Chemical Engineering Journal, 313, pp. 261-269, 2017

A methodology for finding the optimal iteration number of the SIRT algorithm for quantitative Electron Tomography

Egileak: A. Okariz, T. Guraya, M. Iturrondobeitia, J. Ibarretxe

Aldizkaria: Ultramicroscopy, Volume 173, February 2017, Pages 36–46

Methodology to classify the shape of reinforcement fillers: Optimization, evaluation, comparison and selection of models

Egileak: R. Fernandez-Martinez, M. Iturrondobeitia, J. Ibarretxe, T. Guraya

Aldizkaria: J Mater Sci (2017) 52: 569. doi:10.1007/s10853-016-0354-1

Mechanical Behavior of PLA/Clay Reinforced Nanocomposite Material Using Fe Simulations: Comparison of an Idealized Volume against the Real Electron Tomography Volume

Egileak: P. Jimbert, M. Iturrondobeitia, R. Fernandez-Martinez, T. Guraya, J. Ibarretxe

Aldizkaria: Advanced Materials Research, Vol. 1139, pp. 20-24, 2016

Use of Classification Trees and Rule-Based Methods to Predict Shapes of Nano-Aggregates of Reinforcement Fillers

Egileak: R. Fernandez-Martinez, P. Jimbert, M. Iturrondobeitia, J. Ibarretxe and T. Guraya-Diez

Aldizkaria: Applied Mechanics and Materials Vols. 799-800, pp 130-134, 2015.

Extending the overlay method in order to capture the variation due to amplitude in frequency dependence of the dynamic stiffness and loss during cyclic loading of elastomers

Egileak: Z. Kareaga, T. Guraya, A. Arriaga, P.E. Austrell

Aldizkaria: Constitutives Models for Rubber IX, 213-218, 2015.

Pin on disk against Ball on disk for the evaluation of wear improvement on cryo-treated metal cutting shears

Egileak: P. Jimbert, M. Iturrondobeitia, J. Ibarretxe, R. Fernandez-Martinez

Aldizkaria: AIP Conf. Proc. 1653, 020048 (2015).

Characterization of recycled rubber using particle swarm optimization techniques

Egileak: I. Uriarte, E. Zulueta, T. Guraya, M. Arsuaga, I. Garitaonandia, and A. Arriaga

Aldizkaria: Rubber Chemistry and Technology, Vol. 88, No. 3, pp. 343-358, 2015.

Candida albicans biofilm development in various biomaterials using the CDC Biofilm Reactor

Egileak: de la Pinta, I; Montoya, E; Zaldua, AM; Alvarez, FJ; Ibarretxe, J; Guraya, T; Eraso, E; Quindos, G.

Aldizkaria: Mycoses, Vol. 58, pp. 83-84, 2015

3D TEM Reconstruction and Segmentation Process of Laminar Bio-Nanocomposites

Egileak: M. Iturrondobeitia, J. Ibarretxe, A. Okariz, R. Fernandez Martinez, Jimbert, T. Guraya, V. Srot, B. Bussman and P.A. van Aken

Aldizkaria: AIP Conf. Proc. 1653, 020047 (2015).

Film forming hybrid acrylic/ZnO latexes with excellent UV absorption capacity

Egileak: M. Aguirre, M. Barrado, M. Iturrondobeitia, A. Okariz, T. Guraya, M. Paulis, J.R. Leiza

Aldizkaria: Chemical Engineering Journal, Vol. 270, pp. 300–308, 2015.

Evolution of Particle Morphology During the Synthesis of Hybrid Acrylic/CeO2 Nanocomposites by Miniemulsion

Egileak: M. Aguirre, M. Paulis, M. Barrado, M. Iturrondobeitia, A. Okariz, T. Guraya, J. Ibarretxe, J.R. Leiza

Aldizkaria: Journal of Polymer Scicence: Polymer Chemistry, vol. 53, 792-799, 2015. doi: 10.1002/pola.27504/pdf

Use of decision tree models based on evolutionary algorithms for the morphological classification of reinforcing nano-particle aggregates

Egileak: R.Fernandez-Martinez, A. Okariz, J. Ibarretxe, M. Iturrondobeitia, T. Guraya

Aldizkaria: Computational Materials Science, Volume 92, pp. 102-113, 2014

Influence of the processing parameters and composition on the thermal stability of PLA/nanoclay bio-nano-composites

Egileak: M. Iturrondobeitia, T. Guraya Diez, J. Ibarretxe, A. Okariz, A. M. Zaldua Huici

Aldizkaria: J.Appl.Polym.Sci. Vol. 131(18), pp. 9120–9127, 2014

Modeling of the mechanical properties of carbon-black reinforced rubber blends by machine learning techniques

Egileak: R. Fernandez-Martinez, R. Hernandez, J. Ibarretxe, P. Jimbert, M. Iturrondobeitia and T. Guraya-Díez

Aldizkaria: 2nd Asia Conference on Mechanical and Materials Engineering (ACMME 2014)

High-Solids-Content Hybrid Acrylic/CeO2 Latexes with Encapsulated Morphology Assessed by 3D-TEM

Egileak: M.Aguirre,M.Paulis,J.R.Leiza,T.Guraya,M.Iturrondobeitia,A. Okariz,J.Ibarretxe

Aldizkaria: Macromolecular Chemistry and Physics 2013, 214, 2157-2164

Monte-Carlo simulations for 3D modelling of rubber

Egileak: J. Ibarretxe, M. Iturrondobeitia, A. Okariz, F. Garrido, J.M. Eguzkitza, I. Lecubarri, M. Salazar, T. Guraya

Aldizkaria: Constitutives Models for Rubber VIII, 2013

Prediction of physical properties of rubber using data mining techniques

Egileak: I. Churruca Echeverria, R. Fernandez Martinez, J. Ibarretxe, T. Guraya

Aldizkaria: ENMA Scientific conference 2013

Study and Simulation of Critical Factors Affecting Final Quality in Electromagnetically Hemmed Automotive Aluminum

Egileak: P. Jimbert, I. Eguia , G. S. Daehn, E. Iriondo , M. A. Gutierrez , I. Hurtado

Aldizkaria: Journal of Materials Engineering and Performance

Metodología para el cálculo de espesores límite libres de fase sigma durante el hipertemple en piezas de aceros duplex de gran sección

Egileak: P. Jimbert, T. Guraya, A. Torregaray, P. Bravo

Aldizkaria: Revista de Metalurgia, Vol 49, No 2, 122-130.

Caracterización a impacto de materiales basados en reciclado de caucho mediante ensayos de compresión a alta velocidad de deformación

Egileak: T. Guraya, F de la Hoz, J. Albizuri, A. Arriaga

Aldizkaria: PMS 2012

Estudio de la importancia de los parámetros de procesado sobre las propiedades mecánicas finales de bionanocomposites de silicatos laminares, haciendo uso del diseño de experimentos (DOE)

Egileak: M. Iturrondobeitia, J. Ibarretxe, T. Guraya, A. Okariz, J. Anakabe

Aldizkaria: PMS 2012

Development and characterization of a 2024 alluminium alloy reinforced with TIC particulates produced by SHS

Egileak: P. Egizabal, M. Merchan, M. Garcia de Cortazar, A. Torregaray, P. Jimbert

Aldizkaria: ECCM15. 2012

Relevance of processing parameters and structure of layered silicate bionanocomposites on their final application properties

Egileak: M. Iturrondobeitia, J. Ibarretxe, T. Guraya, A. M. Zaldua, J. Lopez-de-Uralde

Aldizkaria: ECCM15. 2012

Analysis of the solidification and properties of plaster cast al based composites

Egileak: P. Egizabal, A. García-Romero, A.Torregaray

Aldizkaria: Archives of metallurgy and materials; 57 (1). 2012

Sekzio handiko duplexeko piezen prozesu termikoaren ikerketa tenplaketa industrialean

Egileak: P. Jimbert et al.

Aldizkaria: Materialen Zientzia eta Teknologiaren I. Kongresua. 2012

Karakterizazio teknika berrien garapena: Konpositeen 2D eta 3D-tako nano- eta mikro-karakterizazioa TEM eta mikroskopio optikoko irudietan oinarrituta

Egileak: M. Iturrondobeitia, J. Ibarretxe, A. Okariz, J. Kano-Ibarretxe, T. Guraya

Aldizkaria: Materialen Zientzia eta Teknologiaren I. Kongresua 2012

Innovative microscopy based techniques for 2D and 3D structural characterization of polymer composites

Egileak: M. Iturrondobeitia, J. López-de-Uralde, J. Kano-Ibarretxe, F. Garrido

Aldizkaria: European Symposium on Polymer Blends 2012

Study of the influence of the compounding parameters via Design of Experiments (DOE) on the thermal, mechanical and physical properties of PLA/nanoclay bioplastics. Definition of the optimum processing parameters

Egileak: M. Iturrondobeitia, J. Anakabe, T. Guraya, A.M. Zaldua

Aldizkaria: 2nd International Symposium Frontiers in Polymer Science. 2011

Analysis of the solidification and microstructure of two aluminium alloys reinforced with TIB2 particulates

Egileak: P. Egizabal, M. García-de-Cortazar, J. Douin, A. Torregaray, J.F. Silvain

Aldizkaria: Advanced Engineering Materials, 13 (9); 887–894. 2011

Estudio de la microestructura y propiedades de una aleación Al-Cu4Mg1 reforzada con 3% de partículas de carburo de titanio (TiC)

Egileak: A. Torregaray, P. Jimbert, T. Guraya, P. Egizabal, M. Merchán

Aldizkaria: Materiales compuestos, 11; 211-212. 2011

Obtaining 3D structural models from TEM-tomography reconstructions

Egileak: J. Ibarretxe, M. Iturrondobeitia, F. Garrido, J. López-de-Uralde, Z. Saghi

Aldizkaria: Joint meeting of the two Iberian Microscopy Societies 2011

Three-dimensional carbon black aggregate reconstruction from two orthogonal TEM images

Egileak: J. López-de-Uralde, M. Salazar, A. Santamaría, A. Zubillaga, P. G. Bringas, T. Guraya, A.Okariz, E. Gómez, Z. Saghi

Aldizkaria: ECCMR 2011

Automatic Morphological Categorisation of Carbon Black Nano-aggregates

Egileak: J. López-de-Uralde , I. Ruiz , I. Santos , A. Zubillaga, P. Bringas, A. Okariz, T. Guraya

Aldizkaria: Lecture notes in computer science: 6261; 185-196. 2010